All about Comfort Overlocks

All about Comfort Overlocks

Those who sews know: It is important not only to cut and sew a product correctly and sew a product, but also to process sections so that the fabric does not disperse, and the product did not lose the product. For the processing of edges, a special sewing machine is used – Overlock. In this article we will talk about the models of Comfort trademark, their advantages and consumers, technical characteristics, and also give consumer feedback.

Overlock Comfort: Advantages and Disadvantages

Motherland Comfort trademark – China. The main advantages of products produced by this brand are:

  • Not bad quality+
  • affordable prices+
  • Models are designed to use 3-4 threads+
  • Capable to perform various seams (most models)+
  • Compact sizes+
  • Full package includes also some parts, in particular, knife, coils and t. D.+
  • Ease of use and regulation when working.

Of course, there are also disadvantages, but they are surprisingly a little – factory lubricant of low quality and the need for early sewing to monitor the uniform feeding of the threads.

Review models

For your convenience, the main characteristics of the models are connounced in the table, where the differences between them are clearly visible.

Indicators

Comfort 110

Comfort 140

Comfort 150

Comfort 500

Comfort 550

Number of threads (maximum)

4

4

4

4

4

Power, W

135

105

45

105

Refueling and control of threads

manually

manually

manually

manually

manually

Trimming thread

Manual nithe chubble

Manual nithe chubble

Manual nithe chubble

Manual nithe chubble

Manual nithe chubble

Adjusting the degree of clamping fabric

manual

manual

manual

manual

manual

Circuit width (maximum), mm

7

7

five

7

7.5

Seams, number

eight

6

one

one

6

Sewing operations

fourteen

one

one

fourteen

Sewing speed (maximum), st. / Min

1300

1300

1200

1200

1300

Stitch width (minimum), mm

3.8

1.5

Stitch length (maximum), mm

4

five

4

five

4

Lifting legs (maximum), mm

6

five

five

five

five

Sizes, see

28 * 32 * 28

28 * 32 * 28

24.9 * 33.7 * 21.5

28 * 32 * 28

Mass, kg

nine

nine

nine

8.3

nine

These data show that between different models of Comfort overlocks very few differences. Dimensions are almost the same as the weight. The maximum / minimum length / stitch widths are varying, the number of seams and sewing operations, as well as slightly different sewing speed. BUT Here is the number of sewing operations and the seams performed at various models of unequal – There are simple products that can only handle the cut by one-sole suture, and advanced, designed for decorative sewing.

Little advice

If you are just starting trying your strength in sewing, Listen to small recommendations.

  • When processing the sewing corners, do not cut the thread, and stop the machine with the raised needle, lift the leg, turn the cloth and continue to sew.
  • To break the unsuccessful lines, it is enough to cut the top of the seam and remove the lower thread.
  • On overlocks, you can not only process the product cut, but also make various decorative and flat seams. To put on the front side of a beautiful flat seam, bend the fabric in the required place, carefully, by the collapse, do not allow tissue cutting, then straighten it.
  • Do not install overlock on soft surfaces, in particular, on the bed – the surface under the machine must be solid, smooth and stable.
  • Do not close the ventilation holes – it will lead to overheating and emergency stops, more serious problems are also possible.
  • Clean the device regularly and lubricate the device – thereby extend the service life and prevent the device from various faults that arise from clogging internal machinery mechanism. All maintenance operations are performed only when the power is turned off.
  • Use for overlocked lubrication only high-quality machine oil.
  • If you have any problems or troubleshoots, contact your repair professionals, do not try to disassemble and repair the device yourself. Of course, you can replace the fastening knife or needle yourself, we are talking about more serious violations.

Be careful when using Overlock – do not drive your fingers under the needle, do not let domestic animals and children, turn off the machine after use and t. D.

Reviews

User Reaction on Comfort Brand Products Mostly positive, There are some disadvantages, but in general consumers are satisfied with Chinese overlocks. Among the main advantages of devices allocate price availability, acceptable quality of products, the ability to perform various seams 3 and 4 threads, ease of operation and maintenance. Also pay attention to the compactness and stability of models.

Complain about the quality of the factory lubricant or its number, sometimes for marriage – the fragility of some details, the need to control the coils at the beginning of work for uniformly unwounding the threads and getting a smooth line. In general, nothing is critical, but everyone knows how sometimes this small inconvenience is annoyed.

Summing up, we can say the following: Comfort Overlocks are designed for home (non-professional) applications, inexpensive, and at the same time quite high-quality. This is a good option for those who sew for themselves and their loved ones.

Comfort 500 Overlock Overview See next video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: