Choose a magnifying glass with an embroidery and needlework

Choose a magnifying glass with an embroidery and needlework

Each hostess in the process of needlework or in any other thin work will require such an assistant like a lupus with illuminated. This adaptation is necessary so that the operation is performed easily and efficiently and did not suffer. In this article we will get closer to the peculiarities and types of this optical device.


Mupa is a special design that is necessary to look at the minor details that barely noticeable with the naked eye.

A simple variant of the embroidery device consists of one lens or a full-fledged mechanism, which contains a certain number of lenses with a small focal length capable of increasing in tens and hundreds of times.

Currently, the market presents a wide range of magnifying glass of various sizes. The main part of such devices is the same as the dome-shaped glass, rounded with flat bottom. These items are widely used in the process of reading books, and for the study of tiny particles, and in needlework.

Types of LUC for embroidery

To perform such a fine operation as embroidery, it is impossible to do without a lightweight. There are different types of facilities under consideration. Read the Read more.

Magnifier with backlit with a head

A similar model is attached to the rim from plastic, the diameter of which is easily adjustable. Then the device is put on the head on the type of baseball caps. Such a magnifier is called binocular. It consists of 3 lenses, two of which have a rectangle shape, and the third is round monocular.

Lenses are made of acrylic polymer, if necessary, they can be easily replaced with new.

Includes removable Lighting, which is powered from two AAA batteries. Illumination greatly facilitates the process of needlework.

Such a design makes it possible to adjust the level of increasing the required object and allows you to:

  • Lighting the embroidery object with light bulbs built into the model+
  • Conveniently secure the device on the head with a belt to regulate+
  • Doing needlework using corrective glasses+
  • quickly remove lenses from the review section+
  • Prevent lateral highlighting the working area.

But such a device requires compliance with the following precautions when used:

  • It is forbidden to leave lenses under the right sunny rays, not to cause a fire+
  • It is categorically impossible to look at the sun through a magnifying glass, In order to avoid eye damage+
  • Do not leave accessory close to the source of fire, so as not to cause deformation of the device.

Desktop Magter For Handicraft Backlit

This design is the average size and is installed on the stand. The main lens has a 9 cm in diameter (increase by 2 times), and the additional built-in is 2 cm in diameter (6 times an increase). The base of the device is raised with rubber pads for the resistance of the magnifying glass. This model is equipped with 2 bright economy LEDs. Power comes from 3 batteries.

With fixture for fixing

This model has a built-in circular illumination that forms a trusted working area. The design has a comfortable fastening that allows you to fix it on any smooth surface. It is not necessary to highlight the battery, as the device is powered by a socket.

For embroidery with joining points

This type of device is attached to ordinary points and makes it possible to free up hands during the embroidery process. Magnaya has a glasses configuration.

It is attached on the clothespin on top of the glasses.

If the device is inappropriate, the device is lifted up and keeps in this position until the need appears in it again.

This option is suitable for sewing and embroidery. Since not all types of lups are equipped with backlights, there is an opportunity to purchase a special lamp for these purposes.

Type of needlework lamps

We will get acquainted with the types of lamps required to illuminate small products.

The design of each lamp consists of:

  • Basics+
  • scattering element+
  • Holding details on which the scattering element is fixed+
  • Switch.

In addition, the device may have additional elements carrying functional filling, Adjusting height level, rotation angle or light brightness.

By type of basics, all lighting devices are divided into:

  • Traditional devices+
  • Designs with clothespin+
  • Fixtures with clamp.

Each of these options is ideal for the embroidery process.

A model having a flat base of square, round or oval shape is classic. A similar basis allows you to make a stable and mobile design.

The device on the clamp is fastened hard to the plane used using a screw lock that allows you to give stability, excluding the fall of the lamp.

The base of the design on the clothespin is made by the type of clamping. This option is very compact and fixed to the edge of the table surface. This type of fastening is reliable and mobile.

Table lamps vary by the type of detail and come:

  • Elastic+
  • Folding+
  • Stationary.

Stationary types of devices are a lamp on a detail in the form of a leg, with a vertical location.

The elastic option has a flexible and plastic holding item. This design is easy to rotate at different angles and change not only the slope, but also the height of the lighting.

Folding devices have retaining parts collected from several parts. Here, too, you can change their position at the expense of the folding and unfolding links of the holder.

Lamps for embroidery differ and turning the switches that happen:

  • Classic+
  • Sensory.

The classic option has a simple pushbutton switch.

Touch type is equipped with sensors reacting to an ordinary touch for inclusion.

What to take into account when choosing?

Next, consider the basic parameters when choosing a design with an embroidery and needlework.

  • It is necessary to know the distance between the lens and the subject. So, for the embroidery and sewing process, an optimal version of a model having a greater multiplicity, but a small working interval. Need to take into account the review and number of details under consideration. A serious aspect is the depth of field.
  • Additionally, you should Pay attention to the focal length and quality of lenses.
  • Highlighting devices need Equip the damage protection system.
  • The design with illumination there must be a steady position On the surface of the table or convenient location on hand.
  • Backlight is desirable to have with independent power supply.


Loupes with backlit for needlework apply in other areas.

  • In cosmetology. In working with manicure, pedicure, the product is suitable for the product with an increase in 3 diopters. To perform injections and in working with very small objects will correspond to the device for 5 DPTR.
  • For reading Rectangular or square form lenses are suitable for 3 diopters.
  • In embroidery. It is better to choose a product on 3 DPTR.
  • In jewelry work. Magnifier required with a maximum increase of 8 and 12 diopters.

Considering the scope and determined with a suitable type of device, it will be easy to purchase such an indispensable assistant to fulfill the favorite work.

Overview Lamp Loupes for Embroidery See in Video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: