How can you hide pipes in the toilet?

How can you hide pipes in the toilet?

Sewer pipes in the toilet not only visually “eat” space, but also look unprepacently. They will be able to fit perfectly only in the interior in the style of Loft. In all other cases, the owners want to disguise them, and even hide them at all for additional designs. Now in stores you can find materials for every taste and wallet. Consider in more detail how you can hide the pipes in the toilet.

Pipe layout schemes

The issue of masking sewer pipes worries both the owners of small bathrooms and large ones, because the aesthetic view of the room depends on.

If you decide to hide communication, you must first pay attention to their location.

2 options are possible.

  • Consistent. Only one consumer is attached to the main riser, the second is attached to the first, and the third one – to the second and so on. It should be borne in mind that water pressure will be less when several consumers are included immediately. This design is quite simple, but takes a lot of space. This option is well suitable for a small apartment with a small number of tenants.

  • Collector. All consumers are joined by special elements (manifolds) directly to the riser. This option is considered optimal, since water pressure remains unchanged for all consumers, and if necessary, you can turn off only one device. However, such a scheme is quite complicated in design.

    The standard layout scheme of plumbing communications in most apartments is that The main risker is in the corner, and several pipes are laid from it to consumers. To hide them, 2-3 additional designs will be suitable. If you need to hide the additional elements, for example, counters, filters, collectors, then here you already need to build a partition or screens. In a private house you can hide the sewer pipes in the walls or niches, you can withdraw all communications into a small room.

    Where to begin?

    First you need to plan the placement of the design and leave the counters and cranes in the reach area to always have access to them in emergency situations. For example, it can be a box with doors. This moment needs to be thought out at the stage of sketch planning on paper, in advance to cut all the necessary holes in the material you are going to sow pipes.

    And also worth remembering – The larger on the cutting of the pipe there are various connections, adhesions, the greater the likelihood of its flow. Therefore, it is necessary to check all communications for tightness, and in case of existence, replace new.

    Tees, corners and other additional elements should be made of the same material as pipes to prevent the flow, otherwise the repair will be made in vain.

    Including you need to measure the area occupied by the pipes that you want to hide in the toilet to calculate the number of materials. It is necessary to take into account the design of your bathroom, because not all materials are combined with each other (for example, light tiles and dark wood).

    Requirements for materials

    Materials must have the following qualities:

    • moisture resistance – This room with high humidity, materials should not be covered with mold and fungus+
    • durability – Counter and cranes should be in constant access, so fragile designs do not last long+
    • Aesthetic – Materials must be combined with the interior in the bathroom.

    What and how to close?

    Due to the variety of materials on store shelves and fantasies of designers today, everyone can easily choose an option to mask sewer pipes in the toilet, which is suitable for him.

    Plastic panels

    This method is most popular because it is not so difficult to install a box of plastic panels as it seems at first glance. In addition, this material has such advantages as:

    • low cost+
    • Wide range of products (color gamma)+
    • Little weight design+
    • Non-flat installation+
    • Resistance to moisture+
    • Long service life.

    Plastic panels consist of polyvinyl chloride, so you can find the name of the PVC panel or lining. Standard dimensions: thickness – up to 1 cm (inside a cellular structure), length – 3 m, and the width is different – from 15 to 50 cm.

      When buying materials Take into account the thickness of the panels and profiles. To install plastic box, you will need tools: knife, screws, screwdriver, level. After checking all communications and accurate measurements, you need to form a framework of profiles and sew it with panels. First, it is better to draw a sketch, then put markers on the floor, ceiling and walls. For fastening you can apply and glue, but it is better to use self-drawing.

      Plasterboard

      This method is very similar to the previous one in both the characteristics of the material and the installation process, but there is the main difference. Plastic panels after building construction do not need subsequent processing. An important feature on which it is necessary to pay attention to is the moisture resistance of drywall. Other models of this material are not suitable for work in the bathroom.

      The installation of the drywall box implies the same actions as in the previous method, namely:

      1. Make marking on the floor and walls, pre-exhausted the scheme on paper+
      2. Prepare profile and connecting elements+
      3. fasten the frame on the wall+
      4. Hang the design of plasterboard.

      After all the works, the material must be primed, thereby prepare for decoration.

      Most often use the same tile that covered the walls of the room. Also, the design can be painted or tinted with plastic panels. Profiles and box must be installed at least 3 cm from pipes.

      It is also necessary to take into account that With a possible breakdown, you may need to dismantle the whole design.

      Sanitary cabinet

      This option is suitable for those who have quite a lot of space in the toilet. Doors that close the sewer pipes are attached to the design of drywall or plastic panels. Fastening elements should be durable because the doors will be in permanent operation. If you have a little space for ordinary swinging doors, but this disguise way you like the most, you can use sliding doors.

      For the manufacture of a cabinet, you can choose any material: plasterboard, plastic, wood (plywood) or glass. The main thing is that it combined with the rest of the finish in the toilet and did not clutch the space.

      Falshland

      If the sewer pipes are located along the whole wall in the same plane, the falseland will fit perfectly to close them. This design will be easier in the construction, as it does not need corners.

      You need to fix the profile on the walls and tinkering plasterboard or plastic.

      After taking pipes between them, there may be free space, which can be used as a shelves for storing household chemicals. The main thing is to think about it in advance, as well as cut holes in the material.

      Decor options

      After all the repair work is made, you can think about the decor. Decorations will give a room more well-kept and aesthetic species. As mentioned earlier, plastic panels do not need to decorate, since the variety of materials allows you to select the panels for your bathroom. But anywayThey can be painted paint, resistant to moisture, prepare the surface in advance.

      Plasterboard can be decorated differently.The most common way is to put the same tile, as in the whole room. Then all the designs will be invisible. As well as plasterboard can be painted.

      If the pipes pass horizontally near the floor to properly use and save space, From above you can make the shelf and remove the items required in the toilet. Additional hatches, ventilation is better to choose from plastic, because they are easier and for them it is easier to care for.

      For their joining, you can choose acrylic glue. Surplus can be removed by a wet rag until it dry.

      Holes for counters and cranes, too, need to disguise so that the designs look beautiful. For this use several materials.

      • Door. It is inserted into the frame, it can be made of plasterboard, plastic, metal. There are ready-made doors that do not need to decorate. But, if it still needed, the trim tile is perfectly suitable.

      • Blinds. This material is represented in different color and material, so you can choose exactly what is suitable for your interior.

        As for the materials, the tissue blinds are better not to choose, because they will be difficult for them to care. This method of decor does not occupy a lot of space compared to the doors, because when opening, they twist into a roll.

        If you do not want to make the sewer of sewer pipes with additional designs, you can always show fantasy and paint pipes at will. Such pipes become part of the interior, which can be presented in such styles as:

        • Loft – Pipes can be painted in gray or black, for this style it will also come up with a copper color+
        • Ecosil – Vertical riser can be masked under a tree or decorate with artificial flowers+
        • nautical – Pipes can be placed by glass pebbles, shells, or invigrate beep+
        • can be used Decoupage technique, mosaic from a variety of materials.

          You can give your fantasy freedom and create a truly unique design solution in the toilet. Do not forget how you will care for pipes, because some materials are not suitable for the bathroom.

          How could you make sure the closing of the sewer pipes in the toilet can be made in several ways. It all depends on the conditions of the bathroom, desire and creativity. High-quality designs will serve for a long time and will become part of your interior.

          About how to quickly build a box for pipes, look next.

          Rate the article
          ( No ratings yet )
          Add comments

          ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: