How from the usual sheet to make a sheet on the rubber band?

How from the usual sheet to make a sheet on the rubber band?

Who did not come across the sheet rolling down from the mattress, with the need to correct her in the middle of the night? The problem is familiar to everyone, and today we will talk about how to get rid of the boring folds of the stuffed sheets once and for all, not even possessing professional tailor skills.

Tools and materials

Bed linen, stitched according to Soviet standards, and they are still quite common in sewing production, not suitable for beds of European sizes. It is not enough for them. There is similar due to the fact that the height of the mattress, made by European standards, significantly exceeds Russian models. In this regard, cuts out the sheet on the gum, very convenient in operation. Such a model does not roll into a bunch during sleep, protects the mattress from all sides of pollution. The store does not always have to buy a suitable model, but it can always be sewn alone.

There is no doubt that, in addition to using a gum, there are other ways to secure sheets on the mattress. For example, pinch it to the corners of the mattress with the help of a pin, but it is unsafe – with this method there is a risk to spoil the mattress and turn around during sleep if the pin suddenly dismisses. Sometimes under sheets, a layer of hard material is used, but there are few people agree, too uncomfortable and uncomfortable.

Sometimes climmers are climbing – devices resembling suspenders. They are fixed to bed sheet with the wrong side of the mattress. With their help you can finely pull the sheet. Manufacturers offer corner and transverse models, but this is a more technological way and not always such a device is at hand. This is a pretty specificity of the fittings, so it’s easier to sew a tensioned sheet on an elastic band.

To do this, you will need tools, fittings and fabric.

  • Thicks+

  • scissors+

  • Durable rubber band+

  • tape measure+

  • Several english pins+

  • Cutting fabric or finished sheet+

  • Finally, the main tool is a sewing machine.

As a rule, a knitted or satin canvas is used – thin elastic fabrics are well taken by the mold of the mattress, tightly fitting it and create comfort in the bedroom. With a cloth for sleep with a human body in contact for a long time, so it is so important to choose a material that will be not only pleasant and convenient, but also safe. The fabric should not contain harmful substances. It is such qualities that natural materials possess:

  • linen+

  • silk+

  • cotton.

Cotton perfectly breathes, not inclined to the formation of a greenhouse effect – in the summer he retains underwear cool, winter warm. It is easy to wash it and stroke. Flax has similar characteristics, but more coarse, besides it is difficult to iron. Silk is exclusively pleasant in the tactile sensation, handsome, does not burn, does not learn, it serves for a long time, but it costs expensive. Natural fabrics have good breathability, hygroscopic, wear resistance, ease of care.

These are the main tips on the choice of material.

  • To determine the quality of the fabric, you need to watch it on the lumen. With poor quality, the inhomogeneity of the structure is visible -. Such a material is not distinguished by durability, through a few styrends the product will look worn.

  • No less important is the smell – natural cotton has only a textile smell, without inclusions of extraneous fragrances. The smell of chemistry indicates the presence of harmful substances hazardous negative consequences, for example, allergies.

Do not stop the choice on the material with an inhomogeneous surface – sticking threads, the raw edge – similar disadvantages do not affect the appearance of bed linen.

For cotton fabrics use thin durable reinforced threads. They perfectly carry any amount of styrics. A good option – LH-45 or Standard No. 40, available in any fabric store and even in economic departments. Color must match the main material background.

Consumption of lining gum is about 5 meters. The rubberized tape must contain a latex thread, which makes it elastic, reliable, durable. In order to save material, you should choose a gum to 3 centimeters width, which will reduce the size of the feeding for the bending.

Stretch sheets do not form folds, remain even even during restless sleep. You can sew not only of cotton and satin, the coarse is also great material – wear-resistant, cheaper, therefore, profitable.

Pattern

Sew a sheet in the form of a cover on a rubber band with their own hands is easy, but the pattern for this will still need it, especially if there are no sewing skills. The main thing is to correctly calculate the size of the future product. This can be done, operating three values ​​- width, length and height of the mattress for which the sheet is manufactured.

Santimeter tape – the most convenient tool for measuring, but if there is no one in the house, you can do and a simple ruler, since all data is measured in a straight line.

To perform the exact calculation of the material of the material for the sheets, goes as follows: summarize the width and height of the mattress, while the height is multiplied by 2, given the need to close the sidewalls.

Having received the initial digits, increase them by 10-12 centimeters for each side – Power supply for gum and bending sheets on the back of the mattress. We get the width of the pattern. The product length calculation is carried out using the same algorithm, with a small difference: the width is replaced by length. As a result, the desired result will be obtained.

As already visible, Initial actions for calculating the necessary measurements are completely simple, it remains to prepare the pattern. No need to scare the size of the size, imagining a giant drawing that is not only difficult to draw, but even find enough paper for it. All this will not be required, it is enough to perform a drawing of angular parts, cut it and compare with the basis (mattress). For more understandable perception, you can connect the “seams” on the scale of scotch and put it on the corner of the mattress. After practicing tape simply cut.

Considering that the most popular and at the same time the largest width is 220 cm, the solid sheet will only be possible for mattresses not exceeding 140 cm in width. For more spacious models, fabric will have to increase. When performing the stages of making patterns and the subsequent cutting material, you need to remember several nuances, important for the correct sewing of the product.

  • Getting Started with a sewing sheets on a double bed with a double bed, it must be remembered that the material will be less than the required width, which means it will have to put it.

  • When building it difficult to fit the flap with a large print or image of animals. To make the finished product, it looks whole, made professionally, it is desirable to give preference to monochromatic colors or small abstract drawings.

  • It is more correct to increase the fabric from the head of the head of, where the pillows will close the connecting seam.

The pattern is applied from the wrong side of the material with a pencil or chalk, with a string, you need to remember the allowances on the seams.

Production options

After the pattern, tools and accessories are ready, it’s time to proceed to the immediate manufacture of the tension sheet.

Fixing elastic ribbon

At the outer edge of the material, the resulting height of the mattress with added to it is 20 centimeters, after which it is applied to the corners made of the pattern, draws the prepared square, cut it out, and do the same with the rest of the corners.

  • Cut sides of the squares are the front side inside.

  • All angles are connected with lounges or a barn seam (a barbell will need to be treated on overlock) on the sewing machine.

  • There comes the turn of rubberized braid – it is sewn throughout the perimeter or from the end sides. As a rule, the split gum is sewn for small products – on a crib. For an adult option, it is best to make a bending with two pieces of elastic braid, sewn from the end sides. Sheet with a gum located on both sides is much more convenient. So much easier to take care of the product, especially it concerns the ironing, it is more convenient to fold and store it.

  • To calculate how long the gum is needed, you can use the formula (50 cm + width of the mattress + 50 cm), where 50, this is the length of the bend of rubber bands on the equity side of the mattress. For example: with a width of a mattress 140 cm, it looks like: 50 + 140 + 50 = 240 cm elastic braid will be needed on all the product. The result is divided into 2.

  • From each edge on the long side of the sheets die 50 cm and make a sneak. This is a label where elastic band ends.

  • The rubberized tape is paved from one sector to another by the involving side of the fabric. One end is fixed with several stitches, covers it 2.5 cm tissue with double addition – the same sweating on the bending. During the line, the rubber must be evenly tightened and at the end of the seam again consolidate it. Also draw up the opposite side of the sheet. When stuck it is necessary to ensure that the needle has pierced the material next to the rubber, it is not assisted – if the braid is stitched “tightly”, it is impossible to subsequently replace it without falling.

  • After the elastic ribbon is sewn on both sides, bend and laid the side of the sheets.

  • The seams on the finished product carefully disappear and revealed, after which they smoothed the entire product entirely and gently fold.

Here, actually, and all, the product is ready. In this way, you can sew a tensioned sheet for mattresses of any sizes – the difference is only in numbers.

Now let’s talk about how to sew a tensioning product from the usual sheet. As it became clear from the above, it will take much more material for sheets on the rubber band than is an ordinary sheet. For manufacture, you have to take a significant number of length and widths at the finished product. From this it follows – the result will be much smaller than the “source”, or have to increase the canvas.

For example: 1.5-bedrooms will be released from a double model. Of the 1.5 bedroom, only a sheet for a cottage bed. In all the rest, the principle of operation is the same as when sewing rolled cloth.

With the help of Kuliska

This option is much easier and is suitable for beginners. All stages, to the sewing elastic braids are similar to those listed above. The algorithm of action changes only when it comes to rubber. On the perimeter of the cross-linked, the cover makes the scenery: lay the seam with a double fog to the distance from the edge of at least 1.5 cm. At the same time, it is necessary to leave the small plot of 1.5-2 cm. According to the above formula, calculate the rubber size. The resulting result is not divided – the braid will be laid inside the scenes throughout the perimeter of the sheet. One end of rubberized braid fasten on the pin and stretch through the stem. After which both ends of rubber are stitched, hiding inside and drag the remaining area.

The finished product once and will ever save the owner from problems with crumpled sheets and annoying folds under the body. If there is a sewing machine in the house, it’s time to stop nervous and take up the business – to sew a comfortable tensioned sheet in a couple of hours. Following the advice received, each can cope with the task.

Several tips on handling finished products.

Intensive wash in the machine-machine quickly triggers even very dense gum, but nobody offers manually. Alternatively, you can use with a powder for mitigating water, such as conditioner.

So that the sheet as long as possible did not lose beauty and quality, during ironing should not be forgotten about the choice of the most suitable temperature mode, and it is difficult to tighten to the ironing angle of ironing boards.

How to make a sheet on a rubber band, look in the video below.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: