Kitchen faucets with flexible expulsion: description, types and selection

Kitchen faucets with flexible expulsion: description, types and selection

The mixer with flexible spill for the kitchen is a unique modern solution and makes the use of the crane as comfortable as possible. Moving design appeared relatively recently, but immediately gained fame and won consumer recognition. Ease of use, practicality and broad consumer accessibility are beneficially distinguished by flexible models from static options, make them the most popular and popular.


Initially flexible is used solely in catering establishments and hospitals, kindergartens and sanatoriums. With their help, there were huge tanks from under the first and second dishes, as well as bassens and volumetric pots. The convenience of moving hussacs was appreciated by employees of such enterprises, over time, flexible models came to ordinary cuisines.

The prototype of modern mixers with flexible expulsion can be considered a rubber hose, which was put on a metal hussak of an ordinary crane and ended with watering. A little later, factory flexible models for home kitchens appeared on the market, which instantly acquired popularity and firmly entered into a modern use.

The kitchen faucet with flexible expulsion is not fundamentally different from the traditional mixer and also consists of a metal case, water supply node and a mixing chamber. Differences are available exclusively in the design of the hussak.

If in classical models it is a static hollow tube capable of rotating around its own axis by 140-180 degrees, then flexible is easily rotated in any direction and can carry out water at any angle.

Due to this, it becomes possible to direct the water jet into any parts of the washing, without difficulty to fill the capacity of any height. This is the main advantage of flexible models over static, with which to dial water into a high jar or a pan, is often impossible because of the low landing of the hussac. Besides, Thanks to the mobility of the spout, the consumer can independently adjust its height and do not create unnecessary splashes when washing dishes.

Having such a mixer, it is very convenient to wash vegetables and fruits, as well as rinse the dishes and big pans.

Flexible is often equipped with additional removal and cranes, intended for connecting washing and dishwashers. More advanced models have a telescopic design. They consist of three or more elements, including the flexible hose. Much popularity have Extending Hussaki, which are equipped with a long expulsion and very convenient to use.

Such models make it possible to fill the water tanks, standing outside the sink, for example, on the floor or plate.

Unlike static variants, mixers with flexible expulsion are produced in a wide range of color schemes, which allows you to choose the desired model under any modern interior.

For the most convenient use, most flexible hussaks are equipped with a special nozzle – aerator. Thanks to the aerators, water is supplied in several modes, such as a powerful jet, wide spraying, a flat-shaped jet or a plurality of weak jets.

In more budget versions there are only two modes: this is an ordinary jet and “rain”.

As in traditional models, the adjustment of the temperature mode of water is carried out using a single-loader mechanism or two hot and cold water valves, depending on the design of the mixer.

Advantages and disadvantages

Like any modern plumbing equipment, mixers with flexible expulsion have both strengths and weaknesses. The advantages of such models include the following factors that are advantageously distinguished by mobile hussaks from their static analogues:

  • The flexible design of the hussak allows you to use one mixer into two adjacent sinks, which significantly expands the workspace and makes the work in the kitchen as comfortable as possible+
  • Many models are equipped with special nozzles, with which you can easily delete lime deposits, and the built-in aerator makes it possible to independently adjust the pressure and shape of the jet+
  • High mobility and the ability of the hussak bent to any side allows the jet “reach” to almost any corner of the sink, which is impossible to do with the help of an ordinary mixer, of course, the fluid supply angle can be put on its own discretion, which allows washing volumetric items from sides, without turning them and without using for this bath and shower+
  • Thanks to the moving design of washing many non-standard objects, such as lattices of ovens, refrigerators and gas stoves, becomes the most convenient+
  • A simple design ensures the ease of management of the hussac, to cope with which even a child can+
  • Most flexible fiber is fully compatible with standard mixers, so they can be purchased separately and installed on the old crane, which allows you to significantly save money and not spend money on a new mixer+
  • The use of flexible hussacs allows you to reach any of the sink walls and contain it in perfect condition+
  • flexible is simply indispensable for washing products that are difficult to wash, holding weight.

However, along with obvious advantages, disadvantages of mixers with flexible expulsion still have. Related to them The high cost of most products, as well as difficulty cleaning the hussac from lime, What is explained too complicated design of some models. And some notes Futuristic designs, What makes most of them are incompatible with classic and romantic kitchen interiors. Such a crane will noticeably differ from the general style and look like something foreign.

Types of structures

Classification of kitchen faucets with flexible expulsion is made by several features, one of which is the type of construction. Under this criterion, two models are distinguished, which differ from among themselves not only appearance, but also the principle of work.

  • Two-dense models represent a device equipped with two separate valves located on a common case on both sides of the hussak. Hot and cold water are served on separate pipes and, entering the mixer body, mixed in a special chamber. Ceramic and worm crane-trays are used as overlapping device. In the worm when tightening the valve, pressure on the rubber gasket, which overlaps the water current.

Ceramic locking device consists of two disks with slots and works as follows: when the slot is open, the disks coincide, the water will be easily passing through them. With the position of the slot, the slot is shifted, the hole is overlapped, water ceases to flow.

Advisory costs and simple repairs are considered advantages of two-dimensional mixers with flexible expansion, and among the disadvantages there is a high water consumption that occurs during temperature control.

  • Single-art mixers With a moving hussak, it allows you to adjust the temperature of the fluid with the help of a single lever, and to do this, unlike the double-click options, can be one finger. This becomes possible due to the presence of a special cartridge having a disk or ball design type. Disk Cartridges consist of two discs and work similarly to the crane-descendants of two-fledged models. Ball Mechanisms are a spherical chamber with three holes, through one of which cold water enters, through the second – hot, and through the third – the fluid of the desired temperature is supplied to the flexible hussak.

The benefits of one-art design include ease of operation and economical water consumption. Among the disadvantages, there are high costs, difficulty in repair and special sensitivity of European models to Russian water.

Because of this, most producers recommend setting a coarse cleaning system to a water pipe, which allows to prevent solid particles from entering the mechanism.

The following criterion for the classification of flexible pins is the type of the design of the hussak. For this feature, three types of models are distinguished.

  • Kitchen faucet with exhaust flexible It is a device in which a flexible hose with an aerator pinned at the end is drawn from a static metallic hussac. The soft hose has a length of up to one and a half meters, is not fixed and stands all the time in hand. Testing models include telescopic hussaks that can consist immediately of several elements stretching from each other.

  • Spin in the form of a flexible permanent length hose perfectly fixed in the right position and represents the most numerous category of kitchen faucets. As a material for such hussaks, food silicone is often used. It easily accepts and well holds the right form, it is distinguished by an attractive appearance. Such models are produced in color execution and are very popular.

There are corrugated extensions. Externally, many of them are similar to the shower hoses, but are made in several other technology, capable of hard to fix in the right position, are designed for a large number of changes in the form.

  • The third type of mixers is represented by models with a long flexible hose, which does not move inside and hangs on a special bracket. Such models are used in catering establishments, where there is a need to wash large tanks, as well as filling the containers located at some distance from washing.

Considering the types of faucets with flexible expulsion, it is impossible not to mention Contactless models, equipped with a motion sensor and including water only when any item is placed under. However, such products have a very high cost, because of which the demand for them is not too large. And also exist options with water heating function. Such devices work on the principle of a flow water heater, they are especially in demand in homes, where there is no centralized hot water supply.

Materials manufacturing

The quality of mixers with flexible expulsion is largely determined by the materials used for their production. Modern models are manufactured stainless steel, brass, ceramics, silumin and plastic, present in different combinations. The most common material today is brass. Brass faucets are not subject to rust, durable and distinguished by an attractive appearance.

To give models of the image suitable for retro and classics styles, often use and bronze, which is a fairly durable material and guarantees a long service life of cranes. For silicone poles, a special variety of this material is used, which even during contact with hot water does not highlight to it toxins and toxic substances.

Forms and sizes

The modern market of plumbing equipment offers faucets with fading in a wide variety of sizes and shapes. There are models at once with several hussaks located on the general building. So, the mixer with two hoses is designed to supply ordinary drinking and purified water.

Having bought such a model, you do not need to acquire an additional filter, since it is enough to open the second crane to get a clean water.

There are options and three poles, one of which is designed to supply filtered water, the second – for cooled and the third – for the carbonated. However, such mixers are quite expensive and do not use great demand.

As for the sizes, all models with flexible expulsion of a non-sensitive type can be divided into three categories. The first includes shortened hussaks up to 20 cm long, which are well suited for small washes and are intended for washing dishes and fruits. The following category is represented by pillings with a length of 20 to 25 cm and is the most numerous. The third group belongs to the model with hussaks Over 25 cm. The length of the retractable and telescopic fouls can reach 1.5 m.

How to choose?

When choosing a mixer with flexible expulsion It is necessary to pay attention to a number of moments.

  • Type of shell. For this feature, mixers are licensed and national teams. The first do not have seams and are more reliable. The second consist of several separate parts, which significantly increases the probability of breakage.
  • Management type. Of course, the most convenient is a single-art mechanism. It allows you to open water with one hand and reduces its consumption when adjusting the temperature. However, such models look good only in modern interiors, and for classic or rustic style it is better to choose a two-mentile model.
  • Compliance of the planting hole and mixer body size. In order not to complicate the installation and not use the auxiliary inserts and locking plates, it is better that these two parameters match the most coincided.
  • You should pay attention to the turns and rings of corrugations, which should be the same form and do not have protruding sites. In addition, the scum should be well fixed in different positions and not return to its original state. The aerator when switching modes should also be clearly fixed, and its surface is embossed and convenient for switching.


    Installation of a mixer with flexible expulsion is no different from installing a conventional mixer and can be performed independently. The system is mounted in one hole, after which they are connected to hot and cold water. For its eyeliner use standard flexible hoses with appropriate labeling. On models intended for hot water, there is a red hatching, for cold – blue.

    Most of the mixers with flexible expulsion are calculated for the maximum temperature of the fluid to +80 degrees and the working pressure of 0.4 MPa (the maximum permissible indicator corresponds to 1.6 MPa). In addition, almost all models are distinguished by unified landing places and are suitable for fastening on any sink. Exceptions are non-standard exclusive models, the installation of which is better to entrust professionals.

    More about installing a mixer with flexible expulsion you will learn by looking at the following video.

    Rate the article
    ( No ratings yet )
    Add comments

    ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: