LED lamps for the kitchen: what happens and how to choose them?

LED lamps for the kitchen: what happens and how to choose them?

Currently, the owners of residential premises when planning repairs are thinking about not only to decorate the rooms, but also, perhaps, to learn any benefit. Including popular treason is the economy of electricity. For this, LED lamps are installed in the apartment. What is it, what pros and cons are available and how to place these lighting devices in the kitchen, let’s talk in our article.

Pros and cons

Like each device, the LED lamps exist their advantages and disadvantages. To begin with, it makes sense to stay on the pros.

As already noted, Such lighting appliances have an energy-saving function. They are based on LEDs. To compare with the familiar incandescent lamps, the savings can exit substantially, since electricity in this case is consumed much more economical. Consumers believe that if you place LED lamps across the apartment, you can get savings on electricity by 30-45 percent. Despite higher cost, such lamps pay off quite quickly. In addition, they are much less likely.

Next, it is necessary to note the compact dimensions of such devices. And although the LEDs are very small, but they are capable of illustrating the room. This allows not to install volumetric lamps, which successfully saves space, and such a moment is especially important for small kitchens.

LED service life is several times higher than those familiar incandescent lamps. The main thing is to acquire a quality product from a proven manufacturer, then the payback will not make himself wait.

Besides, The owners of the room always have the opportunity to enable imagination and create a unique design of the room. LEDs can have a different light emission spectrum. Besides the usual yellow, it can be white. And there is also the possibility of darkening the LED lamp with the choice of the required degree of brightness, which can be adjusted both automatically and manually. This will help make the kitchen even more comfortable and cozy.

However, at all positive moments, it is impossible not to say about minuses. Separate LEDs may not last long enough. This, with other schemes of operation of the lighting network, leads to sad consequences – the work of the entire chain will be broken until a faulty lamp is replace.

Views

LED lamps are increasingly distributed in the modern market. Talk about their main types.

First Group – Furniture. Most often they are round and have a separate ceiling. The purpose of such lamps is to divide kitchen zones. They can be made in the form of tapes located in a plastic shell. They are recorded on the facades of the kitchen headset to illuminate the most part of the worktop, which is especially relevant in the cooking process. Such lamps are inexpensive, as they consist of the simplest LEDs. And at the same time they are very reliable and do not require much care.

Second group – Lamps for cabinets. They are characterized by the fact that they have a separate ceiling with light diodes. Such lamps can illuminate both internal and external space of cabinets. They can be built-in or independent elements.

Similar ceiling have a life of at least 5 years.

Products on batteries, on the contrary, the most affordable cost. They do not need to be included in the overall circuit. Plafones are installed in the kitchen so that, if necessary, it was possible to quickly and silently replace the batteries. There are quite often on sale for sale and enjoy well-deserved popularity. Very useful in the sudden disconnection of the central lighting.

And finally, Overhead lamps. They are no less popular than the previous species, differ simplicity of installation and operation. Externally, they consist of a plastic housing in which the LED lamp is located. The housing is fixed on the surface with an adhesive layer. This is both a minus, since the adhesive layer has a lying property over time, so the design may one day simply fall off the surface.

Recommendations

Those who decided to establish LED lamps in the kitchen, specialists give several recommendations. Follow them or not – the case of each consumer, but the familiarization will still not be excess.

To be able to change the angle of falling light, you should use linear models with a rotary basement. It is them most often used for location in the working area.

Modular options – an indispensable thing to create general lighting. In this case, they are located on the ceiling.

Sensory models are perfect for the working area. They can be placed directly above the table top.

Overhead suitable for accommodation anywhere. They can be used to zoning the room. They are especially relevant among the owners of kitchenines of small dimensions. Wireless models often have a built-in motion sensor.

As for embedded lamps, they are universal. They can be embedded in any surface. For small rooms, this option is also relevant, as it helps to significantly save space. With the help of several similar devices, you can create complete lighting of the kitchen or focus on a certain zone.

LED lamp can be any. Someone attract the angular versions, and someone loves flat models or seeks to find trendy bulk options.

The most important thing is to withstand the stylistics of the room and calculate the layout of the lighting devices in advance.

How to choose

If the choice in favor of the LEDs is made, it will not know how to purchase a lamp required in each case without allowing errors. First you need to calculate the power. In this case, to simplify the task, it is necessary to take into account that the usual light bulb with a capacity of 60 W is replaced by LED by 6 W.

As for the kitchen, the optimal will be the use of a 12 W lamp.

We must not forget that in such premises humidity is most often increased, and the use of these models is absolutely safe.

It is worth contacting only in proven stores, as well as to use products exclusively from reliable manufacturers.

Designers recommend paying attention to the color decision. If we are talking about ceiling lights, you can use warmer lighting, when highlighting functional zones, it is permissible to use cold light.

Another difficulty – the choice of a suitable design of the lamp with switch.

Recommendation Here can be only one. The main thing is to withstand overall stylistics.

Where to locate

The main advantage for which LED lighting devices are so appreciated by consumers, this is what they can be arranged literally everywhere. This is used by the owners of residential premises, including their fantasy and developing the most unexpected options.

If you plan to hang a chandelier, it is recommended to stop your attention on the model that has not too many decorative elements. Wipe and wash such a device will be much easier. If there is a desire, it can be replaced by a certain number of point lamps installed on the ceiling. And the most convenient will place the swivel lamps on the ceiling rod.

As for the working area, the backlight in this area is never excess. Furniture lamps are best fit. They are located right above the table. You can pay attention to sensory control models. And also installed LED ribbons that are tensioning for different distance.

It will not hurt the backlight and cabinets with cabinets. Place lighting devices at the top of the center. In the presence of glass elements headset such an effect will be especially original look.

How to organize LED backlight in the kitchen in 5 minutes, you can learn from the video below.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: