Sockets in the kitchen on apron: what to put and how to arrange?

Sockets in the kitchen on apron: what to put and how to arrange?

It is impossible to imagine a modern kitchen without a large number of household appliances. It requires electricity, respectively, it is necessary to think about how to place a sufficient number of outlets so that they do not get out of the overall design and looked appropriate. Currently, the sockets often have on apron. On the characteristics and intricacies of the installation of sockets where food is preparing, let’s talk in our article.

How to define quantity?

As for the number of outlets, a universal answer to this question does not exist. It all depends on how spacious kitchen, and how many household appliances are on it. However, experts recommend placing on apron at least 3 outlets. You can mount the sockets of 2 or 3 pieces in different places.

The consumer needs to be borne in mind that such devices like a stove, cooking surface, oven, washing and extractoring must have autonomous outlets. As for the rest, in one power supply can be connected to several devices having a small power.


Sockets are recommended to be placed at a distance of 10-30 centimeters from the tabletop. This is a kind of standard height. If there is an opportunity, it is better to stay at higher indicators. It will be very convenient when tableware will be located on the table or it will put products that will block access to the outlet, placed too low.

There are some rules that need to follow when installing. For example, the sockets intended for small kitchen appliances must be 1.1-1.4 meters from the floor. If highlighting is provided, power sources for it are 20 centimeters from the table top. Sockets for hoods are located 50-60 centimeters from lockers.

Montaja rules

The first thing to pay attention to the installation is observance of safety techniques when working with electricity. The device that is included in the outlet, need to be placed at a distance of no more than 1.5 meters about it. The power supply itself is set at a height of 1 to 1.5 meters from the floor. It is necessary to trace all contacts and wires to be impenetrable for water. Of these considerations, it is not worth placing the outlets in the sink area and near the hob.

As for the installation procedure directly, it consists of several stages. Installation cannot be called too complicated technically, however, there are subtleties that need to be taken into account during the work. An unprepared person should not assign a similar mission.

Work with electricity is better to entrust professionals if there is no solid confidence in their own.

It should be noted that overhead sockets are easier. In the case of them, it is often not required for the walls of the walls under the wires. Such designs can be installed over the coating, while maintaining its integrity. In addition, such power sources have quite affordable cost. If the outlets want to hide, you can use special hidden options.

This is quite a new trend, however, more and more often appears on store shelves. Such power supplies are points hidden under a special mechanism that reveals them when pressed. When the outlets are closed, then almost not visible. Over there is a cover that protects against dirt and water.

Choosing this option, you need to carefully examine this issue. The fact is that the nominal indicators are a significant disadvantage.

The value of current in such sockets in the overwhelming majority is 6a, which is absolutely not suitable for powerful techniques. In the kitchen it is recommended to use elements from 10a. If this nuance does not scare, you should select models made in the steel case.

Common mistakes

For those who do not have the experience of installing power sources, it is important to have an idea of ​​the most frequently allowable errors. Note the main of them. There is a chance that the number of installed sockets will not match the real needs. This may occur because new electrical appliances are acquired, respectively, the dots of the power require more.

Installation should be made before the kitchen set is installed. We must not forget about the punching of the shortfold, if necessary. The error is the installation of an outlet for an exhaust where it will be located herself.

It is forbidden to place power points in close proximity to the stove or kitchen sink. Models must be moisture-proof. Also, do not take into account the size of the plinth on the working surface. Can be mistaken and in cross section of wiring.

How to install?

When the location of power sources is ready, it is necessary to place directly the surface of the apron. After that, the holes are prepared. How exactly it is done depends on what material made apron. Most often enough to drill a niche. At this stage, you need to ensure that the drawing is not broken. If the apron is made of glass, it will not work independently. Measurements should be made, which are then transmitted to the manufacturer who will prepare apron. This is the only option to make holes for the socket on the glass canvas.

The perforator hoses the place under the outlet. If it is supposed to be installed in the place where the power supply is already available, the previous version is dismantled. In the specified area sets the distribution box. The outlets are placed in the finished nests, their connections are twisted, attached and insulated. These manipulations are necessary in order to eliminate overheating in the process.

We must not forget that the wires of the phases and zero should be divorced.

Installation process

As for the installation process itself, it is necessary to do as follows. First of all, the room where the work is carried out, you need to de-energize. After that, an apron is attached to the wall with prepared holes and wiring. Next you need to install the outlet boxes. The wiring is placed in the stroke and fixes there.

At the next stage, you need to connect a socket to wiring. In the course of work it will be necessary to ensure that the wires are connected to both the outlet and the power distribution box. Next, the connections are checked, and if there are no comments, the shutters must be embedded by the building composition, on top of which putty. At the final stage, the sockets themselves are screwed. Electricity is supplied to the room, and the functionality of the power supply sources is checked.

Master class on installing outlets on the kitchen apron waiting for you further.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: