Sucking cabinets for kitchen: species and choice

Sucking cabinets for kitchen: species and choice

The convenience and functionality of such a room, as a kitchen, largely depends on the placement and type of furniture selected. Among the main components of the kitchen headset, not the last place occupy a sketch of sinks, presented in various sizes, forms and configurations.

Features and destination

The sink in such a room, like a kitchen, is an important part of the working area, without which the operation of the room for its intended purpose will be complicated. But for the installation of a similar component, most of it will take special furniture, in the role of which the cabinet performs. It represents Floor cabinet small sizes without a lid or with a special hole for the installation of washing.

In addition, this design will serve as a sink frame, it performs a number of important functions in the kitchen.

Among the main tasks is to highlight the following.

  • With the help of such parts of the kitchen headset, you will be able to hide some low-rotten, but required elements of the room with the necessary communications. This applies to water pipes, filters, hoses, siphons and other important parts of the water supply system.
  • Due to the cabinet during the operation of washing and working with water, partial noise absorption occurs, in the light of which in the kitchen will be more comfortable to perform daily tasks.
  • This design usually becomes a useful closed area, where you can store dishes, detergents, vegetables, garbage bins and T. D.
  • Thanks to the end, it will be possible to make the interior in the room more harmonious.
  • In small kitchens, part of the tabletop can perform the tasks of the working area. However, it largely depends on the configuration of the sink and the size of the design under it.

Types of structures

In order to make the right choice of such a component of the kitchen headset, it is worthwhile to have an idea of ​​the main varieties of such furniture. Tomb classification is carried out on the basis of their forms. Today manufacturers offer:

  • Straight designs for washing+
  • Models of angular type+
  • Trapezoidal options.

The first model is used most often in the light of comfort during operation. In such a component, it is very easy to store various important things, for this, the tube inside is usually equipped with shelves, drawers, grids and t. D. It is in such a form of the end of the end that you can install a small household appliances.

Conducts the demand for this option for the convenience and simplicity of access to internal filling, in addition, the direct tube in the kitchen for the sink can be installed anywhere in the room as a continuation of the table top or separately the standing module. As a rule, these designs in size coincide with the sink itself.

Corner models most often acquired for kitchens shred in space. Thanks to the placement of the sink at the junction of parts, the headset will be able to save the useful area of ​​the room, but in terms of the functionality of the internal space, such structures will be given to the first direct view.

Conducted by non-standard sizes, but special hinged brackets, cells or carousel boxes can be released from such a situation, some of them will be able to attach directly to the door of the couch.

The impactor of the corner type are notable for their depth, so, Thinking in advance how to use a free square, we will be able to easily equip the kitchen without much work. Corner structures can be M-shaped or have a triangular shape. In any of the options when installing the module, a specialist may be required.

Course for washing in the form of a trapezium The most spacious among the above options. Due to the width of the inner area in such furniture, it is possible to store a lot of items, even non-standard and large-sized. In addition to the usual separation of the area of ​​the doors into two zones, the trapezoidal tube can be additionally divided into compartments. In addition to the advantages inside, usually such countertops are more convenient to operate on top.

Materials manufacturing

Most often manufacturers use three main types of raw materials for the manufacture of regulatory kitchen tumbers:

  • Array of wood+
  • MDF+
  • Ledp.

Designs made of wood stand out by their external attractiveness and environmental friendliness, in addition, have a more presentable view in the overall kitchen interior. However, such products are highlighted by their high cost, which in aggregate with the impracticality of the tree to accommodate it near the sources of water and high humidity often acts as the main minus in the consumer choice. Such vehicles in the course of operation will require a special approach to cleaning, since wood is capable of swelling or crumbled from moisture.

When using such designs, they will need mandatory processing to protect against damage.

MDF stands Present products from chip panels glued on the basis of natural substances. It allows them to include them to the category of safe models for operation in the kitchen together with products. This raw material, unlike the massif, is able to keep the form, the material is quite dense. Scaffolding products are represented in large colors of manifold, usually products are additionally covered with a special moisture protection composition, which provides furniture a large operational resource.

Ledp – Practical raw materials having a completely democratic value. From such a material will be able to pick up the end to any kitchen headset, because manufacturers offer their products in a wide color of the manifold. However, in comparison with previous materials, LDSP is highlighted in its low indicators of environmental friendliness, Since laminating edges in designs are usually covered by special compositions that evaporate formaldehyde during operation and heating.

Methods for installing shells

Classification of Tumb Depending on their configuration and raw materials used for production, involves dividing the design by the type of shell installation. Three main options are distinguished who are inherent in their individual features.

Surface mounted shell

Used in practice most often. As a rule, direct courses are purchased for this. The essence of editing is In removing the top panel from the design, the washing is attached to the furniture instead of furniture, fixing around the edges around the perimeter. This option is most often choosing for independent work, since Even for considerable masters, such works do not provide any difficulties with further wiring of communications.

Cutting installation

To perform this installation, in the acquired end, you usually make a hole in the lid, in which the washing will be installed. In this embodiment, it is important to ensure tightness of the joints when installing. As a rule, with works concerning wooden furniture, even newcomer can cope.

Integrated mounting

Such works concern the placement of the shell in this version so that in the future the tabletop amounted to a single integer with the sink due to the dense adherence. To get a monolithic surface in the kitchen, you will need a certain experience, so All major manipulations with a tabby better entrust to experts.

Sinks for such installation most often made from artificial or natural stone. In terms of hygienicness, they are in the first place.


Dimensions of Tumbers with sinks will be directly dependent on the area of ​​the kitchen itself, in addition, an important point is Method of installation of furniture. It is worth noting that it is most often for sale. You can find standard sinks, the width of which will be no more than 50 centimeters at a depth of about 55-60 centimeters, respectively, the rectangular sizes will have dimensions of 50×60 cm, sometimes 60×80 cm. As for angular models, their depth will be about 80-90 centimeters.

An important parameter of Tumb will be height. As a rule, it will depend on the size of the rest of the kitchen headset, as well as the depths of the shell. Usually these indicators do not exceed 20 centimeters. It is best to pick up the sinks to the stands, so that they were a few centimeters less, so that the sides of the table will still have a little place for the junction.

Manufacturers allocate the following typical dimensions of direct modules for shells:

  • depth – from 40 to 70 centimeters+
  • height – from 70 centimeters to 1 meter+
  • width ranging from 50 centimeters to one and a half meters.

Corner cabinets are:

  • depth – 30-80 centimeters+
  • width – from 1 meter and more+
  • height – from 70 centimeters to 1 meter.

Trapezoid and other non-standard options are usually made according to individual standards.

How to choose?

Because manufacturers of kitchen furniture offer a variety of Tumb options in terms of design species, washing and color solutions, In the process of selection it is worth considering the following points.

  • First of all, the option you like should be harmonized with the rest of furniture and interior. In addition, for options for non-standard form it should be found in the room.
  • It is best to purchase the cabins in conjunction with the sinks, so it will be possible to avoid errors when buying.
  • It is important to pay attention to the material from which the tabletop is made. Emphasis should be made on water-repellent properties of raw materials, since the operational term of furniture depends on. If it is planned to use heavy meals from a stone, you need to pay attention to such a characteristic of the material of the Tumba, as the strength.
  • If the choice fell on the corner structure, then the important nuance on this issue will be the convenience of operation, as well as freedom of movement during the use of the sink.
  • The color solution of the cabinet should be harmonized with the sink so that they make the impression of a holistic cabinet model. Among alternative options, you can consider the choice of Tumb, in a single color scheme with a shade of floor covering or other parts in the interior.
  • Internal filling of the cabinet plays a far from the last role. By purchasing your favorite model, it is worth examining the possibilities of rational use of space under the sink, regardless of the size of the design itself. As a rule, standard rectangular stands 600×800 mm will be able to accommodate not only a trash can, but also a set of cleaning agents, drawers with vegetables and T. D. As for the trapezoid or angular versions, even large containers can be placed inside them, for example, basin or pan.

About how to make an end to a sink from cutting plastic with your own hands, look in the following video.

Rate the article
( No ratings yet )
Add comments

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: