Knit rabbit amigurumi

The content of the article
  1. Training
  2. Work description
  3. Useful advice

Knit rabbit amigurumi

Toys associated in the Japanese technology Amigurumi look in a special gently and cute. On the Internet you can find many schemes and master classes to create one or another animal or a fabulous character. Our today’s material is devoted to knitting a cute little long rabbit.

Training

To begin with, it will be necessary to purchase all the necessary materials and tools. List them.

  1. You will need only a knitting hook №2 or №2.5 (“Two” better, since the mating will be more densely, and through holes will not peck out a pack) and a sewing needle with a big ear (for the final assembly of toys and embroidery eyes with a spout).
  2. Yarn acquire fluffy: recommended “grass” from “Cetex” or mohair. Color can be any, but if you want the animal to look natural, choose a white, gray or beige thread threads.
  3. Follow the rabbit preferably hypoallergenic fillers: Hollofiber, Synthepha.
  4. For embroidery of peephole and nose Take threads Moulin of black and pink colors.

Work description

Below is a detailed rabbit knitting scheme with long ears. It should turn out about 6 cm in height (provided that it will sit). If you want to tie a larger toy, just add rows and loop increases. Note: Abbreviation “SBS” means a column without a Nakid.

Head + carcass:

  • 1 row: knit ring amigurums from 6 loops+
  • 2: add 2 fails to each loop, and we get 12+
  • 3: We add 1 fails, add 2 failures to the next loop, we repeat it along the length of the entire row, we get 18 fails+
  • 4-8 rows: 18 loops+
  • 9: Santor 6 ISBS, we reduce one on 7 and 14 loop, will remain 16 pieces.+
  • 10: Say 5 failures, we reduce one on 6 and 12 loop, as a result we get 14+
  • 11: Knit 4 fails, the subsaling will be on 5 and 10 loops, will remain 12+
  • 12: 2 SBS, further additive 2, repeat over the entire row – 16+
  • 13: 2 SBS, additive 2, Repeat – 21+
  • 14: 3 SBS, additive 2, Repeat – 26+
  • 15-20 Rows: 26 loops+
  • 21: 6 SBS, reduction one by 7, 14 and 21 loop – will remain 23+
  • 22: 5 SBS, Refailed (6, 12, 18) – 20+
  • 23: 4 SBS, Refailed (5, 10, 15) – 17+
  • 24: 3 ISP, Underbought (4, 8, 12) – 14+
  • 25: 2 SBS, Refailed (3, 6, 9) – 11.

Slip into the opposite wall, fix. Thread hiding with hook inside.

After checking, 11 rows need to make a package of the resulting head of the rabbit, otherwise it will be problematic to do.

Front legs (two pieces.):

  • 1 row: form a ring amigurum, score 6 loops+
  • 2: 1 ISP, 2 Add, repeat – it turns out 9+
  • 3: 2 SBS, 2 add, repeat throughout the row – 12+
  • 4-6 rows: 12+
  • 7: 3 ISP, further refuting in 4 and 8 hinges, and there will remain 10+
  • 8-10 rows: 10.

Fasten knitting, leave a long thread for sewing paws to the body.

Rear legs (two pieces.):

  • 1 row: ring amigurums of 6 loops+
  • 2: 1 TBF, additive 2, Repeat – 9+
  • 3: 2, add 2, repeat – 12+
  • 4-7 rows: 12+
  • 8: Rubage on 3, 6 and 9 loops – will remain 9+
  • 9-10 rows: by 9+
  • 11: 3 SBS, add 2, repeat over the entire row – it will turn out 11 columns+
  • 12-14 rows: at 11+
  • 15: Refrigerated on 4 and 8 loops will remain 9.

Fix, leave a long thread, as in the previous case.

Forecock:

  • 1 row: Collect the ring amiguri from 6 loops+
  • 2: 1 scon, add 2, repeat – 9+
  • 3: 2, add as much, repeat – we get 12 fails+
  • 4: 12.

Fix it, leaving thread.

Ears (two pieces.):

  • 1 row: Traditional Colek from 6 loops+
  • 2: 2, add 2, repeat – 8+
  • 3: Do the same, as a result we get 10 kettles+
  • 4: Again the same thing – 13 fails+
  • 5-14 rows: by 13+
  • 15: 4 SBS, we make a gravel on 5 and 10 loop – 11+
  • 16: 3 SBS, we reduce 4 and 8 – 9.

Reinstall knitting again, leave the long end of the thread for the sewing of the ears to the head.

Tail:

  • 1 row: 6 loops in the ring amigurum+
  • 2: 1, add 2, repeat – 9+
  • 3: 9.

Ending knitting, fixing the thread and leaving the required segment for sewing to the carcass.

The rabbit assembly includes several steps.

  1. First of all it is necessary to fill the caller, legs and handles selected by filler.
  2. Severate from below, that is, first attach the rear legs. Best sustain them so that the rabbit sat: a toy will be more stable.
  3. Success handles.
  4. Now attach the muzzle. You need to fill it when it is almost sewn.
  5. Ears and tail can not stuff. But if you wish that your rabbit have sticking ears, then slightly fill them with a packing.
  6. Eyes and spout with threads Muline.

    On the eve of the approaching Easter it will be possible to tie several such cute miniature rabbits and give them close to. BUT To the toy becomes more thematic, “to supply” her Easter egg: a real, souvenir or also related to the technique of Amigurum.

    Useful advice

    So that you have done the first time and you were inspired to create new handmade masterpieces, listen to our advice.

    1. In the course of work, write down everything you do, step by step. This will give you the opportunity to make a toy, for example, when receiving an order. And you do not confuse which rod kits at the moment and how many add / lifts need to do.
    2. Amigurumi implies a dense mating. So take a small hook: 2 or even 1.5. Although for a start it will come up and 2.5.
    3. Put the marker (thread of another color) in the first or last loop of the row. He will help you in their calculation.
    4. As a packing, do not use cotton wool or loskutka fabric: knitted web is very flexible, pliable, all lumps, irregularities and bugs will be visible on it.
    5. For amigurums are not suitable glass or plastic eyes: they are very “cheap” toy, plus such minor parts can be easily tearned and swallowed with a small child. Ideal solution – embroider eyes and nose threads Moulin.

    How to tie a rabbit Amigurum See in the video below.

    Rate the article
    ( No ratings yet )
    Add comments

    ;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: