Each owner of his own guitar came across the problem of selection of suitable strings. Currently, two main varieties of such components for string musical instrument are available: metal and nylon. Today we will talk about the second option, consider the main advantages and disadvantages of strings made from nylon.
Nylon strings for guitar are special calibrated fishing line. Raw materials for their manufacture has the appearance of the smallest balls. Most often it is used in combination with a variety of chemical additional components.
For the production of such strings, the initial raw materials are first warmed up, and then the resulting mass is passed through the holes of the desired diameter. Threads stretch over special roller devices, and then cooled by fixing the desired form. This allows them to give them the necessary elasticity and rigidity.
In the process of creating such nylon threads necessarily processed by special components, which are able to significantly increase the level of elasticity, strength and durability of these synthetic products. Due to the presence of a variety of additives in the manufacture of a string of this type may have a variety of colors.
Advantages and disadvantages
Nylon strings have a lot of important advantages. Consider each of them separately:
Easy to pull on the guitar+
It’s easier to clamp in the lads+
relatively low cost.
It should be noted that In contrast to metal models, such strings will not injure the hands of the playing. After all, they are pretty soft, have a large diameter, do not crash into the skin. This material will be pleasant to the touch.
Nylon products can be used for various types of guitars, including for acoustic.
But these types of strings have a number of shortcomings that also need to be considered before buying them:
It is much more difficult to set up+
Perhaps deaf sound+
Not enough clear sound (nylon is very hard keeps a note on the same level).
What strings better choose?
Before you purchase such synthetic products for the guitar, it is worth remembering some important selection rules. There are separate types of nylon strings for classic and for acoustic guitars.
In the first case, conventional models with a dense soft winding are used. At the same time, the products of brass, copper, phosphorous bronze are preferably taken mainly. And also a good option for classic musical instruments are carbon sets.
They will be much stronger compared to simple samples. In addition, carbon varieties will allow you to give an unusual bright and the most clear sound of the melodies.
The operational period of such strings will be quite high.
For acoustic guitars, conventional metal strings are most often taken, which are further wrapped with nylon material. In this case, as the basis, it is better to take parts made from yellow or from phosphoric bronze.
How to put?
To achieve the most high-quality and clean sound in the game of the game on the guitar, it is necessary first of all correctly lock all the strings. If you have chosen nylon models for your musical instrument, then first items will need to be removed (it is recommended to change all the strings at once).
In order to remove old details, it will only need to unscrew a little ring, which will significantly loosen the tension. So the thread will be released and weakened, then it is gradually removed from the holes.
When the upper edge is free, you can proceed to unleash the nodule, which is placed at the bottom end. And only after that completely pull the thread. Then you can start installing nylon new strings.
To pull the details correctly, First you need to clean the string tool from all the garbage and dirt, if it is on the surface of the housing. The threads are needed in a strictly defined order: 6, 1, 5, 2, 4, 3. Only this sequence will be true.
Using this method of sequence, take the sixth string, its end is tightly tied with a special small nodule, having formed a small hole in the hole.
After that, they take the second end of the nylon thread, it is neatly reaching the ring, and then cut off about 10 centimeters above it, they have been trapped in the hole made and fully rotate the entire mechanism. Such a fastener is obtained as reliable as possible.
Most often to install nylon strings on the guitar, you need to take advantage of special fasteners. In this case, all the threads first tighten a bit, and then insert into them.
To do this, it is necessary to fix a specially intended mechanism to the ring, while the handle that leads it in motion is attached to the side. Customize the guitar can be both hearing and using a special device specifically designed for this.
Nylon string care
In order to maximize the operational life of such parts, it should be remembered for some important rules for care. If you play more than 5-6 hours daily, then such nylon elements can be enough for a couple of weeks. The service life will be highest, if you immediately put on the tool the details of the strongest tension with the winding of the copper wire.
Also, do not drag nylon products during the guitar setup process. It is not recommended to store such products in too cold rooms or under conditions with sharp temperature differences.
Models made from nylon material should be wiped with a special cleaning agent after each game. And it is also necessary to thoroughly wash your hands before each game on the guitar.
Store such details are recommended in sealed covers in a dry and warm room. Do not forget to change the slices and thresholds in time.
Remember that nylon does not tolerate the shock view of the game. It will be raised quickly and will become unsuitable for further use. Threads with winding can be periodically wiped with cologne or alcohol.
The choice of nylon strings is considered in the following video.